|
INSTRUCTIONS
FOR YOUR NEW SIGN KIT
|
|
1. REMOVE BRUSHES, LID AND INK PAD FROM THE INK WELL.
2. POUR ABOUT 1 OZ OF THE CORRESPONDING COLOR OF INK INTO THE INK WELL TO THE MARK AT BOTTOM OF THE NECK ON BOTTLE.
3. NOW SET BRUSHES IN THE INK FOR 10 TO 15 MINUTES TO LET THEM SOAK UP
THOROUGHLY.
4. NOW PUT INK PAD BACK IN THE INK WELL, REPLACE THE LID AND BRUSHES.
PRESS DOWN ON THE BRUSH SO INK PAD WILL ABSORB THE REST OF THE INK.
NOW YOU ARE READY TO MAKE SIGNS.
|
5. RE-INK BRUSHES WHEN THEY BECOME DRY BY PLACING THEM INTO INK WELL AND PRESSING DOWN 2 OR 3 TIMES SO THEY CAN SOAK UP MORE INK.
6. REFILL INK WELL WITH ABOUT 3/4 OF AN OZ OF INK EACH TIME PAD BECOMES DRY.
***NOTE USING 3/4 OUNCE OF INK IS SUFFICIENT. TO MUCH INK CAN CAUSE A MESS.
7. WE USE VERY FIRM FELT IN OUR BRUSHES SO IT TAKES LONGER TO ABSORB INK FOR THE FIRST TIME. HOWEVER, USING FIRMER FELT WILL GIVE YOU MUCH LONGER WEAR WHILE MAINTAINING A FINER EDGE.
THANK YOU FOR CHOOSING OUR POSTER AND SIGN MAKING KIT. WE ARE CONFIDENT YOU WILL GET MUCH USE AND FUN OUT OF THIS PRODUCT....
PROUDLY MADE IN THE USA!!!
|
|
